2019 8th International Conference on Material Science and Engineering Technology (ICMSET 2019) edit
2019 8th International Conference on Material Science and Engineering Technology (ICMSET 2019)--SCOPUS, Ei Compendex
Singapore, October 19-21, 2019
Dear Scholars and Researchers,
2019 8th International Conference on Material Science and Engineering Technology (ICMSET 2019) will be held in Singapore during October 19-21, 2019. Indexed by Elsevier: SCOPUS, Ei Compendex (CPX).
Full papers accepted will be published by Materials Science Forum (ISSN print 0255-5476 / ISSN web 1662-9752,Trans Tech Publications),Indexed by Elsevier: SCOPUS, Ei Compendex (CPX).
ICMSET 2018 - Materials Science Forum(MSF)
ICMSET 2017 - Materials Science Forum(MSF) Vol. 917, ISBN: 978-3-0357-1213-1.
ICMSET 2016 - Materials Science Forum(MSF) Vol. 890, ISBN: 978-3-0357-1028-1.
ICMSET 2015 - MATEC Web of Conferences Vol. 30, 2015.
Papers of ICMSET2017 & ICMSET2016 & ICMSET2015 are indexed by Ei Compendex and Scopus!
ICMSET 2019 is now accepting manuscript submissions.
Please submit your full paper to us: firstname.lastname@example.org.
October 19th, 2019: Registration and Collecting conference materials
October 20th, 2019: Keynote speeches, Oral & Poster Sessions
October 21st, 2019: Social Activity (Pending)
MS. SILVIA LI
Call for Papers
Topics: The conference is soliciting state-of-the-art research papers in the following areas of interest:
(01) Materials behavior
(02) Casting and solidification
(03) Powder metallurgy and ceramic forming
(04) Surface, subsurface, and interface phenomena
(05) Coatings and surface engineering
(06) Composite materials
(07) Materials forming
(09) Nanomaterials and nanomanufacturing
(10) Biomedical manufacturing
(11) Environmentally sustainable manufacturing processes and systems
(12) Manufacturing process planning and scheduling
(13) Meso/micro manufacturing equipment and processes
(14) Modeling, analysis, and simulation of manufacturing processes
(15) Computer-aided design, manufacturing, and engineering
(16) Semiconductor materials manufacturing
(17) Laser based manufacturing
(18) Precision molding processes
(19) Joining processes
(20) Rapid manufacturing technologies
(21) Nontraditional manufacturing
(22) Nanofabrication, nanometrology and applications
(23) Metrology and measurement
(24) Mechanical and Electronic Engineering Control
Prof. Ramesh K. Agarwal Washington University in St. Louis, USA
Professor Ramesh K. Agarwal is the William Palm Professor of Engineering in the department of Mechanical Engineering and Materials Science at Washington University in St. Louis. From 1994 to 2001, he was the Sam Bloomfield Distinguished Professor and Executive Director of the National Institute for Aviation Research at Wichita State University in Kansas. From 1978 to 1994, he was the Program Director and McDonnell Douglas Fellow at McDonnell Douglas Research Laboratories in St. Louis. Dr. Agarwal received Ph.D in Aeronautical Sciences from Stanford University in 1975, M.S. in Aeronautical Engineering from the University of Minnesota in 1969 and B.S. in Mechanical Engineering from Indian Institute of Technology, Kharagpur, India in 1968. Over a period of forty years, Professor Agarwal has worked in various areas of Computational Science and Engineering - Computational Fluid Dynamics (CFD), Computational Materials Science and Manufacturing, Computational Electromagnetics (CEM), Neuro-Computing, Control Theory and Systems, and Multidisciplinary Design and Optimization. He is the author and coauthor of over 500 journal and refereed conference publications. He has given many plenary, keynote and invited lectures at various national and international conferences worldwide in over fifty countries. Professor Agarwal continues to serve on many academic, government, and industrial advisory committees. Dr. Agarwal is a Fellow eighteen societies including the Institute of Electrical and Electronics Engineers (IEEE), American Association for Advancement of Science (AAAS), American Institute of Aeronautics and Astronautics (AIAA), American Physical Society (APS), American Society of Mechanical Engineers (ASME), Royal Aeronautical Society, Chinese Society of Aeronautics and Astronautics (CSAA), Society of Manufacturing Engineers (SME) and American Society for Engineering Education (ASEE). He has received many prestigious honors and national/international awards from various professional societies and organizations for his research contributions.
Prof. WANG John National University of Singapore, Singapore
Professor Wang’s research focuses on new functional ceramics, electroceramic and composite materials that are inevitably required for the next generation of energy generation and storage, electronics and healthcare. His research group has been working on novel fabrication techniques for these materials and understanding of the correlations between their structural parameters, at various length scales ranging from molecular, nanometer to micrometer ranges, and their functional properties.
More recently, Professor Wang’s research is concentrating on carbon-based materials, nanohybrids and mesoporous materials for energy generation, energy storage and biomedical applications. He and his research group have successfully developed several types of new nanohybrids and mesoporous materials for applications in energy generation storage and drug delivery.
More details here
Prof. Zhang Hua Nanyang Technological University, Singapore
Dr. Hua Zhang obtained his B.S. and M.S. degrees at Nanjing University in China in 1992 and 1995, respectively, and completed his Ph.D. with Prof. Zhongfan Liu at Peking University in China in July 1998. He joined Prof. Frans C. De Schryver’s group at Katholieke Universiteit Leuven (KULeuven) in Belgium as a Research Associate in January 1999. Then he moved to Prof. Chad A. Mirkin’s group at Northwestern University as a Postdoctoral Fellow in July 2001. He started to work at NanoInk Inc. (USA) as a Research Scientist/Chemist in August 2003. After that, he worked as a Senior Research Scientist at the Institute of Bioengineering and Nanotechnology in Singapore from November 2005 to July 2006. Then he joined the School of Materials Science and Engineering in Nanyang Technological University (NTU) as an Assistant Professor. On March 1, 2011, he was promoted to a tenured Associate Professor. On Sept. 1, 2013, he was promoted to Full Professor. Until 01 Jan. 2019, he has filed 73 patent applications and 460+ papers with total citation of over 55,000 and H-index of 117. He is one of the Chairmen of the Editorial Board of ChemNanoMat (2015-), sits on the Advisory Board of Chemical Society Reviews (2012-), Materials Chemistry Frontiers (2016-), Matter (2019-), Nanoscale (2012-), Nanoscale Horizons (2015-), and NPG Asia Materials (2018-); the Editorial Advisory Board of ACS Nano (2014-), Advanced Functional Materials (2018-), Chemistry of Materials (2014-), ACS Applied Materials & Interfaces (2014-), Small (2012-) and Nanofabrication (Versita, 2012-); the Editorial Board of ACS Omega (2016-), Applied Materials Today (2015-), Carbon (2013-), CHEM (2016-), Chinese Science Bulletin (2014-), Energy Storage Materials (2015-), EnergyChem (2018-), Graphene Technology (2016-), Materials Today Energy (2016-), npj 2D Materials and Applications (2016-), Science China Materials (2014-), and NANO (2007-); the International Advisory Board of Chemistry – An Asian Journal (2018-); the International Advisory Panel of Materials Research Express (2014-2016); the International Editorial Board of ChemPlusChem (2012-2015); and the Scientific Advisory Board of Small Methods (2017-). He is an Associate Editor of International Journal of Nanoscience (2007-) and was one of the members of the Advisory Committee of IOP Asia-Pacific (2010-2013). In 2015, he was elected as an Academician of the Asia Pacific Academy of Materials (APAM). In Nov. 2014, he was elected as a Fellow of the Royal Society of Chemistry (FRSC). Moreover, he received the 2015 ACS Nano Lectureship Award (2015), the World Cultural Council (WCC) Special Recognition Award (2013), SMALL Young Innovator Award (2012) and Nanyang Award for Research Excellence (2011). In 2016, he was listed in the top 300 most cited researchers in the field of materials science and engineering by Elsevier Scopus. In 2017, he was listed in the "Highly Cited Researchers 2017" in Chemistry and Materials Science. In 2016, he was listed in the "Highly Cited Researchers 2016" in Chemistry and Materials Science. In 2015, he was listed in the "Highly Cited Researchers 2015" in Chemistry and Materials Science, and also listed as one of 19 “Hottest Researchers of Today” in the world (please see the World’s Most Influential Scientific Minds 2015 by Thomson Reuters, 2015). In 2014, he was listed in the "Highly Cited Researchers 2014" in Materials Science, and also listed as one of 17 “Hottest Researchers of Today” and No. 1 in Materials and More in the world (please see the World’s Most Influential Scientific Minds 2014 by Thomson Reuters, 2014).
Prof. Jun Song CHEN University of Electronic Science and Technology of China
Professor Jun Song CHEN received his Ph.D. at Nanyang Technological University in 2012. After that, he worked at the Max Plank Institute of Colloids and Interfaces as an Alexander von Humboldt researcher from 2013 to 2014. He is now a Professor at the School of Materials and Energy, University of Electronic Science and Technology of China. He was one of the “Thomson Reuters Highly Cited Researchers” in 2015 and 2016, and “Elsevier Chinese Highly Cited Researchers” in 2017. His research interests include the design of nanostructured materials for energy-related applications, such as supercapacitors, lithium-ion batteries, and water splitting.
Assoc. Prof. Aleksey Vedyagin BORESKOV INSTITUTE OF CATALYSIS SB RAS, RUSSIA & TOMSK POLYTECHNIC UNIVERSITY, RUSSIA
In 1997 I was graduated from Omsk State University. From 1999 to 2001 I was post-graduate student at Boreskov Institute of Catalysis of Siberian Branch of Russian Academy of Sciences, Russia. I defended my PhD thesis entitled “Catalytic dehydrogenation of methanol over supported copper catalysts” in 2005. From 2004 till 2014 I was an associate professor at Novosibirsk State Technical University, Russia. At the same time, since 2004 till 2008 I was a scientific researcher at Boreskov Institute of Catalysis. In 2008 I became a scientific secretary of the institute. Now I am a deputy director on science of BIC, head of Laboratory for nanostructured catalysts and sorbents research, head of Department of materials science and functional materials. My scientific interests are heterogeneous catalysis, oxide and metal catalysts, carbon nanostructures, carbon-based composites, dense and porous membranes, nanomaterials, nanotoxicology, etc.
- ICMSET 2019 Full papers accepted will be published by Materials Science Forum (ISSN print 0255-5476 / ISSN web 1662-9752,Trans Tech Publications),Indexed by Elsevier: SCOPUS, Ei Compendex (CPX).
- ICMSET 2018 - Materials Science Forum(MSF)
- ICMSET 2017 - Materials Science Forum(MSF) Vol. 917, ISBN: 978-3-0357-1213-1.
- ICMSET 2016 - Materials Science Forum(MSF) Vol. 890, ISBN: 978-3-0357-1028-1.
- ICMSET 2015 - MATEC Web of Conferences Vol. 30, 2015. Papers of ICMSET2017 & ICMSET2016 & ICMSET2015 are indexed by Ei Compendex and Scopus!
- There is no relevant meeting at this meeting.